Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
Software Installation
26-MultiMobile
lation. If not, go to section A (Enable PCMCIA Ser-
vice of OS/2 Warp) to install the PCMCIA Service.
A. Enable PCMCIA Service of OS/2 Warp
1.In the OS/2 Desktop group, double-click on the
OS/2 System icon.
2.Double-click on the System Setup icon.
3.Double-click on the Selective Install icon.
4.Select the PCMCIA Support button.
5.Select PCMCIA system.
For example: select IBM ThinkPad 750
6.Click OK.
7.Click Install
8.Select the source drive and directory
For Example D:\OS2IMAGE
9.Click Install
10.Click OK
B. Install NetWare Request
1.Insert diskette labeled WSOS2_1 to diskette drive
A:
2.Change current drive to A:
3.Run INSTALL.EXE
4.Select Installation
5.Select Requester on workstation...
6.Set Target Directory
Assume C:\NETWARE
7.Click OK
8.Select Edit CONFIG.SYS and Copy All Files...
9.Click OK
10.Insert diskette labeled WSDRV_1 and Click OK
11.Select NE2000.SYS driver
12.Click the Continue button
13.Insert diskette labeled WSOS2_1 and Click OK
14.Click the Continue button
15.Select the SPX Support for OS/2 Sessions