Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
Software Installation
29-MultiMobile
INTERRUPT - value
where values is one of the following interrupts:
3, 4, 5, 7, 9, 10, 11, 12, 15.
To have Card Services select an available
interrupt resource then place a value of 0 at this
location.
NOTES FOR PACKET DRIVER
The following are examples of partial CONFIG.SYS
file for loading SystemSoft Card Services and Packet
Driver:
Examples of partial CONFIG.SYS file:
DEVICE=C:\CARDSOFT\SS365SL.EXE
DEVICE=C:\CARDSOFT\CS.EXE
DEVICE=C:\CARDSOFT\CSALLOC.EXE
C:\CARDSOFT\CSALLOC.INI
DEVICE=C:\CARDSOFT\CARDID.EXE
device=c:\tcpip\lanen.exe
device=c:\tcpip\le100pd.sys
NOTES FOR WINDOWS FOR
WORKGROUPS DRIVER
The following are examples of partial CONFIG.SYS
file and AUTOEXEC.BAT for loading SystemSoft
Card Services and drivers for Windows for
Workgroups:
Examples of partial CONFIG.SYS file:
DEVICE=C:\CARDSOFT\SS365SL.EXE
DEVICE=C:\CARDSOFT\CS.EXE
DEVICE=C:\CARDSOFT\CSALLOC.EXE
C:\CARDSOFT\CSALLOC.INI