Owner`s manual
Table Of Contents
- Contents
- Chapter 1 - Introduction and Description
- Chapter 2 - Installation
- Chapter 3 - Software Installation
- Chapter 4 - Troubleshooting
- Introduction
- The Card Service does not enable my card
- How do I know the FAST Ethernet PC card is
- How do you enable the FAST Ethernet PC card?
- How do you make the card work under Systemsoft Card Service?
- How do you make the card work under Phoenix Socket/Card Service?
- How do you make the card work under Award Socket/Card Service?
- How can the ODI driver run successfully but fail to login to the Netware server?
- What to do should your Driver installation fail
- Chapter 5 - Service
- Appendix A - Regulatory Agency Information
- Index
Troubleshooting
36-MultiMobile
type is not acceptable, edit NET.CFG to change
the frame type at the client site or add the frame
type that can be accepted at server site.
Q:What to do should your Driver installation fail?
A:1.Insert the MultiMobile PC Card into any one avail-
able PC Card Slot in your computer. The BIOS
detects Plug and Play NIC. Place the Driver dis-
kette into the computers floppy drive and Click
NEXT.
Figure 4-1. Update Driver Installation
Display
2. A dialog box appears indicating the recognition of
an updated driver on the floppy disk. Click on
OTHER LOCATION. Do not select FINISH.