Owner`s manual

Software Installation
24-MultiMobile
3.Select LANTASTIC 6.0 in Network Operating Sys-
tem screen.
4.If current settings are acceptable, select Start Instal-
lation and go to step 6. Otherwise, select Modify
Parameters to change settings.
5.Move cursor to highlight each field you want to
change and press Enter to select a new value. When
the configuration is set, press Enter on the OK field
to exit the screen, and go back the step 4.
6.The Installation program starts to copy the related
files from the diskette to the destination directory
and modifies CONFIG.SYS, PROTOCOL.INI, and
STARTNET.BAT under users agreement.
7. Reboot the computer to have the selected driver
take effect.
IBM OS/2 Warp
NDIS2 Driver for OS2 Warp
Before driver installation, ensure that the PCMCIA is
installed and working properly. If the PCMCIA Ser-
vice of OS/2 Warp has been enabled, go directly to
section B (Install NDIS2 driver for IBM LAN Server
4.0) for driver installation. If not, go to section A
(Enable PCMCIA Service of OS/2 Warp) to install the
PCMCIA Service.
Section A
Enable PCMCIA Service of OS/2 Warp
1.In the OS/2 Desktop group, double-click on the
OS/2 System icon.
2.Double-click on the System Setup icon.
3.Double-click on the Selective Install icon.
4.Select the PCMCIA Support button.
5.Select PCMCIA system.