User manual

19
APPENDIX 2: Software Update for Siemens M1
When ordering the Siemens M1, make sure it supports NON-TRANSPAR-
ENT data transfer. This means that the M1 firmware must be version
4.02 or later. If not, you can get it from Siemens. Also you can get a
description of the new software features (Word file M1-nt2.doc) from
Siemens.
The Siemens instructions to download the new software are the follow-
ing:
Downloading New Software
The M1 consists of two hardware parts, the DSA (Data Service Adapter)
and the Mobile. Because of this the software update consists of two files:
1. DL_0_50N.EXE — software update for the DSA (test version)
2. M1_4_02N.EXE — software update for the Mobile
To update the M1 be sure that it is switched on, and that the M1 is
connected with the COM port of the PC. Then execute the two files in
the order mentioned above:
1. If the M1 is connected via the COM2 port enter: DL_0_50N -COM2
to implement the new DSA software.
For help enter: DL_0_50N -H
2. To implement the new M1 software, enter:
M1_4_02N -COM2
Note: The current version of the User Guide and of the M1 software
can be found in the following mailbox:
Mailbox telephone number: [phone].