User guide

Chapter 3 – Using the Front Panel
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 10
12. Setting Your Country or Region Code
You must configure your modem to match the defaults of the country or region in which you are
using it. Choose from any of the three methods:
● Using the LCD Panel
● Using the Global Wizard
● Using AT Commands
Finding Country or Region Codes
To find the country or region codes for your device:
1. Go to http://www.multitech.com/PRODUCTS/Info/approvals and click on global modems.
2. Select your country or region and device from the drop down list.
3. Click Display.
Using the LCD Panel
1. Start at the Status LCD and use the down arrow to move through the menu to the Region Select LCD.
2. Use the right arrow to move from the Region select LCD, across the Region Setting Options LCD, to
the Current Setting LCD.
3. If the current setting shown is not the one for your region, arrow across to the Region Profile LCD.
The question mark represents the question “Is this the region you want?” If B5 is your region, press
Enter. If it is not the one you want, arrow across until you see the code you desire. Refer to Finding
Country or Region Codes for details.
4. When you reach the region code you want, press Enter. Option Set appears.
5. After setting the region profile, you can re-power the modem or use the arrows to move back and
up the menu tree to return to the Status LCD.
Using the Global Wizard
If your computer runs Windows, use the Global Wizard to configure you modem for a specific country or
region with just a few mouse clicks.
1. Go to http://www.multitech.com/setup/product.go and select your model from the Product drop
down list.
2. Click Software and click the Global Wizard link.
3. Click Open.
4. Click Next, Yes, Next, and Finish to complete the install.
5. Click Start | All Programs | Global Wizard and select Global Wizard.
6. Click Next. The Global Wizard searches for your modem.
7. Click Next after your modem is identified.
8. Select the country or region in which the modem will be used. Click Next.
9. Review your choice. If it is correct, click Next to configure the modem.
10. Click Finish to exit.