MultiModem® USB 56K Data/Fax Modem with USB MT5634ZBA-USB Quick Start Guide
MultiModem USB Quick Start Guide MT5634ZBA-USB P/N 82084554 Rev E Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 1998-2007 by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc., makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
MT5634ZBA-USB Quick Start Guide Introduction This Quick Start Guide will help you install and set up your MultiModem USB. The User Guide can be found on the MT5634ZBA-USB CD.
MT5634ZBA-USB Quick Start Guide Step 1: Assemble the Modem The only assembly required is to mount the feet on the bottom of the modem. Simply peel the four self-adhesive plastic feet off the backing strip and press them into the recesses on the bottom of the modem. Step 2: Connect the Modem to Your System Place the modem in a convenient location. Connect it to your PC’s USB port, the phone line, and, optionally, to your phone.
MT5634ZBA-USB Quick Start Guide Line Connection Plug one end of the phone cable into the modem’s LINE jack, and the other end into a phone line wall jack. Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack or the line cable into the PHONE jack. Note: The FCC and Industry Canada impose certain restrictions on equipment connected to public telephone systems. See the Appendix in the MT5634ZBA-USB User Guide.
MT5634ZBA-USB Quick Start Guide 7. Click the Have disk button. Browse to x:\Drivers\WinXP. Select the file there and click OK. (x denotes the drive letter of your CD drive). 8. When the pop-up window comes up explaining that the driver is not digitally signed, click Continue anyway to finish the installation. NOTE: This Microsoft operating system searches for a digital signature when you install any new hardware.
MT5634ZBA-USB Quick Start Guide 6. 7. 8. 9. Verify that the Specify a location option is the only one selected, place the MultiModem USB CD into your CD drive, and click Next. The next screen will say Insert the manufacturer’s installation disk into the drive selected. Click OK. Click the Browse button (when prompted to insert a disk into drive A:\, click Cancel). Navigate to x:\Drivers\Windows 2000. Select the file and click OK. (x denotes the drive letter of your CD drive).
MT5634ZBA-USB Quick Start Guide Installation in Windows ME Windows ME driver files are installed in two groups, as described below. The installation wizard begins by installing certain driver files. At that point, Windows ME detects the modem as a new device. Then the installation wizard runs again to install the remaining driver files. 1. Power up your Windows ME computer. 2. If you have not already done so, make all the necessary connections. 3. Place the MultiModem USB CD into the CD drive of your PC.
MT5634ZBA-USB Quick Start Guide 8. Windows ME will now detect an “Unknown Device” and begin another Add New Hardware Wizard, again asking “What would you like to do?” Choose “Specify the location of the driver (Advanced)” and click Next. 9. At the next screen (the Windows will search for new drivers screen), uncheck the “Removable Media” button (if necessary) and check “Specify a location.” Click Next. 10. Transient screens will appear while files are being copied.
MT5634ZBA-USB Quick Start Guide 6. The message Windows will search for a new driver displays. Verify that the CD-ROM drive option is selected. Click Next. 7. The Add New Hardware Wizard dialog box indicates that Windows has found an updated driver for this device. Verify that the Updated driver (Recommended) option is selected and click Next. 8. The Wizard dialog indicates that Windows will select the proper driver from the MultiModem USB CD and verify the information.
MT5634ZBA-USB Quick Start Guide Using the Global Wizard to Configure Your Modem 1. Insert the MultiModem USB CD into the CD-ROM drive. The Autorun dialog box appears. 2. Click Initial Setup and Country Selection. The Global Wizard dialog box appears. Click Next. 3. The Global Wizard searches for your modem and identifies it. Click Next. 4. Select the country in which the modem will be used and then click Next. 5. Review your choice of country. If it is correct, click Next to configure the modem. 6.
Patents This device is covered by one or more of 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,574,725; D374,222; 5,559,793; 5,546,448; 5,500,859; 5,471,470; 5,463,616; 5,453,986; D361,764; D355,658; D355,653; D353,598; 5,309,562; 5,301,274. Other patents pending.
