User guide

DSU RouteFinder Quick Start Guide
16
14. Router Name: If this is the only DSU RouteFinder on your
network, you can use the default Router Name (MTROUTER);
otherwise, you must assign a new Router Name in this field.
The Router Name can be any printable ASCII string of up to 47
characters. The DSU RouteFinder uses this name to advertise
its service in the IPX internetwork.
15. Ethernet: You can enable Auto Learn Ethernet Network
Numbers by leaving the default (Yes) checked, or you can
manually assign the network numbers after disabling the Auto
Learn option by clicking on No. If no file server is connected to
the Ethernet segment, then you should select No.
If you leave Auto Learn enabled, the DSU RouteFinder will
learn the IPX network numbers from the file server.
If you disable Auto Learn, record in the space below the
network numbers assigned by the network file server for each
of the four frame types [(Raw (802.3), LLC (802.2), EthernetII
(Type II), SNAP]. You can also record here the Network
numbers for WAN 1 and WAN 2.
RAW (802.3) Frames Network Number _____________
LLC (802.2) Frames Network Number ______________
TYPE_II Frames Network Number _________________
SNAP Frames Network Number ___________________
WAN 1 Network Number _________________________
WAN 2 Network Number _________________________
When you manually assign network numbers, make sure they
match the network numbers assigned to your local file server
(if any).