User guide

Software
17
16. WAN1 and WAN 2: Click the associated check box if one or
the other is to be disabled; otherwise, leave the Enable
checked and double-click the Network number text box and
enter the WAN Network number.
The WAN network numbers have to be assigned by the
network administrator and must be unique throughout the
entire internetwork.
Note: The WAN ports do not have the capability of learning
the network number, unlike the LAN port (i.e., the WAN ports
do not have a file server).
17. Click OK when you are satisfied with your selections.
18. If you clicked OK from the Novell IPX Protocol Default Setup
dialog box (step 13), the IP Protocol Default Setup dialog box
is displayed.
19. To change the IP parameters, proceed to the next step.
Otherwise, click OK to open the WAN Ports Default Setup
dialog box, then proceed to step 23.
20. The default Ethernet IP Address has to be changed to your
unique LAN address. In the Ethernet group, change the default
IP Address, Subnet Mask, and Frame Type to the values
assigned to your LAN port.
21. Click OK when you are satisfied with your selections.
22. The WAN Ports Default Setup dialog box appears with both
WAN Ports enabled. Note: the External/Internal Clock for WAN