User guide

DSU RouteFinder Quick Start Guide
18
1 is selected on the 8-position DIP switch on the circuit board
(External or DDS Clocking is the default). If WAN 1 is not on a
Direct Connection or Leased Line, click that option to disable it,
then enter your ISP’s phone number in the Dial Number field.
23. Set up all parameters in the WAN 2 group. Select the modem
type from the pull-down list; for a synchronous connection,
click the Asynchronous option to disable it; for dial-out
operation, enter the (ISP) phone number in the Dial Number
field, or click the Answering option if WAN 2 will be used to
answer dial-in calls from remote locations.
24. Click OK when you are satisfied with your selections.
25. The Checking Router dialog box is displayed. Click OK.