User guide

DSU RouteFinder Quick Start Guide

Introduction

Welcome to Multi-Tech's new DSU RouteFinder, Model

MTASR2-201, which provides secure and seamless LAN-to-

LAN routing capability and can also provide dial-up capability.

This unit supports multiple WAN services and supports a wide

range of routing protocols including IP, IPX, TCP, and RIP

version 2. When the WAN 2 port is configured to support it,

this unit also supports a secondary capability of dial-up

Remote Access Server (RAS) access for telecommuters and

mobile users from any Point-to-Point Protocol (PPP) or Serial

Line Internet Protocol (SLIP) networking client.

The DSU RouteFinder features a 10BaseT port for local LAN

connection, a command port for configuration, a 56K bps DDS

4-wire WAN connection, and an RS232/V.35 port for an

optional Data Communications Equipment (DCE) device (i.e.,

external modem, T1/E1 CSU/DSU, etc.). System management

is provided through the command port using bundled

Windows

based software which provides easy-to-use

configuration menus.

RD TD CD NS DS RD TD CD

V35

Figure 1. DSU RouteFinder

* Some DSU RouteFinder units may be marked “MultiRouter”

or “MultiRouter 200-Series”; they are equivalent to the “DSU

RouteFinder” referred to throughout this quick start guide.