User guide

DEVICE ACTIVATION AND INSTALLATION
3. Insert the SIM card into the card holder with the contact side facing down as shown.
4. Verify that the SIM card fits into the holder properly and replace the cover.
Removing a SIM Card
To remove the SIM card:
You need:
■ Phillips screwdriver
■ Needle-nose pliers
1. Disconnect power, if it is connected.
2. Use a small Phillips screwdriver to remove the two SIM cover screws and remove the SIM door.
3. Use a needle-nose pliers to grasp the SIM card and pull it from the card holder. Do not touch the contact
with the pliers.
Attaching Power Supply Blades
Power Supply and Blades
If your device shipped with a power cord, attach the blades for your region.
Power Supply no Power Supply with Power Supply with Power Supply with
blades EU blade NAM blade UK blade
Attaching the Blades
To attach a power supply blade:
MultiModem
®
iCell MTCMR User Guide 39