User guide

DEVICE ACTIVATION AND INSTALLATION
■ Verify the location has a strong signal strength.
■ Position the device so the antenna is always vertical and pointing upward.
■ Use the dimensions in the following image to space screw holes.
■ Use either #4 or #6 pan head screws.
Installing Drivers
If your device has a SIM card, install it before installing drivers.
For Linux: This device is compatible with kernel 2.6 and higher. It uses the standard CDC-ACM driver.
For Windows: The following installation procedure is compatible with 32 and 64-bit versions of Microsoft Windows
7, 8, Vista, XP, and Server 2003/2008.
Note: If using Windows XP, you need Service Pack 3.
1. Download the driver from multitech.com/support.go.
2. Unzip the driver.
For serial devices, skip to Step 5.
For USB devices continue with Step 3.
3. Open the Drivers folder and run install.bat.
4. Connect the USB cable to the computer and your device.
5. In Windows, open Phone and Modem from the Control Panel.
6. Click the Modems tab and click Add.
7. Check Don’t detect my Modem and click Next.
MultiModem
®
iCell MTCMR User Guide 41