Product specifications

Multi-Tech Systems, Inc. Quick Start Guide

Slave Command Sequence Example

From Power Up:

1. Check and verify Communication to Slave.

Sent: AT<cr>

Reply: <cr_lf>OK<cr_lf>

2. Get information on Slave Bluetooth address.

Sent: ATSi,1<cr>

Reply: 12-digit address

<cr_lf>OK<cr_lf>

3. Set Slave to automatically connect in Fast Data Mode on

Bluetooth connection.

Sent: ATSW25,0,0,0,0 <cr>

Reply: <cr_lf>OK<cr_lf>

Either cycle power or send ATURST.

Note: This command sequence assumes the radio is set to

factory defaults that allow it to automatically come up and be

ready to connect as a Slave from a Master request.