User guide
Table Of Contents
- Chapter 1 – Product Description and Specifications
- Product Description
- Related Documentation
- Safety
- General Safety
- The modem is designed for and intended to be used in fixed and mobile applications. Fixed means the device is physically secured at one location and cannot be easily moved to another location. Mobile means the device is used in other than fixed locati...
- RF Safety
- Vehicle Safety
- Device Maintenance
- Handling Precautions
- Front Panel Overview
- Package Contents
- Specifications
- Chapter 2 – Activating and Installing the Modem
- Chapter 3 – Using the Wireless Modem
- Appendix A – Regulatory Compliance
- Appendix B - Cellular Information
- Appendix C – Environmental Information
Chapter 2 – Activating and Installing the Modem
Multi-Tech Systems, Inc. MultiModem Cell User Guide 11
Connecting the Antenna and USB Cable
1. Connect a suitable antenna to the ANT connector.
2. The USB cable uses 500mA from the USB power line. Connect one end of the USB cable to your computer or
other USB high power device, such as a hub. Connect the other end to the modem USB connector.
Mounting the Modem on a Flat Surface
You can mount the modem on a flat surface, if desired. To properly place mounting screws, use the
measurements shown in the illustration that follows.
Use #6 pan head screws for all mount locations.