User guide
Table Of Contents
- Chapter 1 – Product Description and Specifications
- Product Description
- Related Documentation
- Safety
- General Safety
- The modem is designed for and intended to be used in fixed and mobile applications. Fixed means the device is physically secured at one location and cannot be easily moved to another location. Mobile means the device is used in other than fixed locati...
- RF Safety
- Vehicle Safety
- Device Maintenance
- Handling Precautions
- Front Panel Overview
- Package Contents
- Specifications
- Chapter 2 – Activating and Installing the Modem
- Chapter 3 – Using the Wireless Modem
- Appendix A – Regulatory Compliance
- Appendix B - Cellular Information
- Appendix C – Environmental Information
Multi-Tech Systems, Inc. MultiModem Cell User Guide 5
Product Description
The Multi-Tech MultiModem® Cell cellular modems are ready-to-deploy, standalone modems that provide
wireless data communication and integrate seamlessly with virtually any application. The MultiModem Cell
cellular modem is based on industry-standard open interface and uses Multi-Tech’s Universal Socket design.
The Cell modem is designed with a quad-band GSM/GPRS/HSPA network. The modems include a USB interface.
If desired, you can mount the modem on a flat surface, such as a desktop or panel.
Model
Description
MTCBA-H3-U1
The MTCBA-H3-U1 wireless modem offers fast cellular data speeds by
using HSPA technology. The modem is equipped with quad-band
technology and can be used on all existing GSM networks, and most
HSPA networks.
Related Documentation
MultiModem MTCBA-H3-U1
Use the HSPA-H3 AT commands to configure the MTCBA-H3-U1 modem. These commands are documented in
the HSPA-H3 AT Commands Reference Guide part number S000505x.
Safety
General Safety
The modem is designed for and intended to be used in fixed and mobile applications. Fixed means the device is
physically secured at one location and cannot be easily moved to another location. Mobile means the device is
used in other than fixed locations.
CAUTION: Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s antenna and
the body of the user or nearby persons. The modem is not designed for or intended to be used in
portable applications within 20 cm of the user’s body.
Check your local standards regarding safe distances, etc.
ATTENTION: Maintenir une distance d'au moins 20 cm (8 po) entre l'antenne du récepteur et le corps de
l'utilisateur ou à proximité de personnes. Le modem n'est pas conçu pour, ou destinés à être
utilisés dans les applications portables, moins de 20 cm du corps de l'utilisateur.
Vérifiez vos normes locales touchant les distances de sécurité, etc..