Product specifications

ManualsBrandsMultitech ManualsComputer equipmentMultiModem ZBA MT9234ZBA

MultiModem

ZBA

MT9234ZBA-Series

MT9234ZBA

MT9234ZBA-V

Quick Start Guide

Summary of content (8 pages)

PAGE 1
MultiModem® ZBA MT9234ZBA-Series MT9234ZBA MT9234ZBA-V Quick Start Guide
PAGE 2
MultiModem ZBA Quick Start Guide MultiModem ZBA Quick Start Guide MT9234ZBA & MT9234ZBA-V 82100201L Rev. B Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2007 Multi-Tech Systems, Inc. Multi-Tech Systems, Inc.
PAGE 3
MultiModem ZBA Quick Start Guide Introduction This guide shows you how to set up your MultiModem ZBA. For detailed information, product specifications, troubleshooting tips, and more, see the User Guide, available on your MultiModem Product CD. Check Multi-Tech’s Web site for current versions of our product documentation. Safety Warnings • Use this product only with UL- and CUL-listed computers. • To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or larger telephone wiring.
PAGE 4
MultiModem ZBA Quick Start Guide Modem Installation Connect the Modem to Your System Turn off your computer. Place the modem in a convenient location, and then connect it to your computer’s serial port, the phone line, AC power, and your phone. Connections – No Voice Connections with voice Connect the Modem to Your PC Plug one end of the RS-232 serial cable into the RS-232 connector on the modem, and plug the other end into a serial port connector on your computer, such as COM1 or COM2.
PAGE 5
MultiModem ZBA Quick Start Guide Connect the Modem to the Phone (Optional) If you want to connect a phone to the same line as the modem, plug the phone cable into the modem PHONE jack. Connect the Microphone (Voice Option Only) To connect a microphone, see the User Guide, available on your MultiModem Product CD.
PAGE 6
MultiModem ZBA Quick Start Guide 1. Make sure your modem is connected properly, and then turn on your computer. Windows should detect your new modem and open the Install New Modem wizard. Note: If Windows cannot find a modem, it may be plugged into the wrong connector on your computer. See Solving Problems in the User Guide. 2. Insert the product CD into your CD-ROM drive, and then click OK. 3. Windows installs the modem driver. 4. Click Finish to exit.
PAGE 7
MultiModem ZBA Quick Start Guide Using AT Commands to Configure Your Modem Non-Windows users can configure the modem using AT commands. You must enter these commands in your communication programís terminal window. 1. Run your favorite communication program and open the programs terminal window. 2. To configure the modem for a specific country: Type AT%T19,0,nn (where nn is the country code in hexadecimalformat Press ENTER. The message OK displays. 3. To verify the change: Type ATI9. Press ENTER.
PAGE 8
Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; D374,222; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D361,764; D355,658; D355,653; D353,598; D353,1