Product specifications

MultiModem ZBA Quick Start Guide
Multi-Tech Systems, Inc. 5
Connect the Modem to the Phone (Optional)
If you want to connect a phone to the same line as the modem, plug
the phone cable into the modem PHONE jack.
Connect the Microphone (Voice Option Only)
To connect a microphone, see the User Guide, available on your
MultiModem Product CD.
Connect the Speaker(s) (Voice Option Only)
For speakerphone or voice mail applications, use a 1/8-inch plug male-
to-male stereo patch cord to connect the SPKR jack on the side of the
modem to the LINE IN jack on your sound card. If your sound card does
not have a LINE IN jack, use its MIC jack. The stereo male-to-male
patch cord can be purchased at a local PC retail store. If you do not
have a sound card, you can plug an amplified speaker directly into the
SPKR jack.
Connect the Modem to the AC Power Outlet
The power switch is located on the right side of the modem. Make sure it
is set to OFF.
Attach the appropriate interchangeable blade module to the power
supply module. Connect the power lead from the power supply module
into the PWR jack on the modem. Now, plug the power supply module
into your power source.
Note: Use only the power supply supplied with the modem. Use of any
other power supply voids the warranty and can damage the modem.
Power-on Test
When you apply power, the modem performs a diagnostic self-test. The
56 indicator should light. If this does not happen, check that the power
switch is on, the power supply is solidly connected, and the AC outlet is
live.
Installing the Modem Driver
If you use Windows 2000 or newer, you must install the modem driver.
The modem driver tells Windows how to control the modem. If you use a
Linux operating system, please see the User Guide for installation
instructions.