User guide

MultiVOIP User Guide Technical Configuration (Analog/BRI)
251
FXO Interface: Parameter Definitions (cont’d)
Field Name Values Description
Flash Hook Options fields
Generation 50 - 1500
milliseconds
Length of flash hook that will
be generated and sent out when
the remote end initiates a flash
hook and it is regenerated
locally. Default = 600 ms.
Detection
Range
-- Not applicable to FXO.
Caller ID fields
Caller ID Type Bellcore
The MultiVOIP currently
supports only one
implementation of Caller ID.
That implementation is Bellcore
type 1 with caller ID placed
between the first and second
rings of the call.
Caller ID
enable
Y/N
Caller ID information is a
description of the remote
calling party received by the
called party. The description
has three parts: name of caller,
phone number of caller, and
time of call. The ‘time-of-call’
portion is always generated by
the receiving MultiVOIP unit
(on FXS channel) based on its
date and time setup. The forms
of the ‘Caller Name’ and ‘Caller
Phone Number’ differ
depending on the IP
transmission protocol used
(H.323, SIP, or SPP) and upon
entries in the phonebook
screens of the remote (CID
generating) voip unit. The CID
Name and Number appearing
on the phone at the terminating
FXS end will come either from a
central office switch (showing a
PSTN phone number), or the
phonebook of the remote (CID
sending) voip unit.