User guide

MultiVOIP User Guide Mechanical Installation & Cabling

8. Ensure that the unit is properly connected to earth ground by

verifying that it is reliably grounded when mounted within a rack.

This can be accomplished by connecting a grounding wire between

the chassis grounding screw (see Figure 3-13) and a metallic object

that will provide an electrical ground.

9. Turn on power to the MultiVOIP by placing the ON/OFF switch on

the back panel to the ON position. Wait for the Boot LED on the

MultiVOIP to go off before proceeding. This may take a few minutes.

Proceed to Chapter 4 to load the MultiVOIP software.