User guide

MultiVOIP User Guide Technical Configuration (Analog/BRI)
227
FXS Ground Start Parameters (not supported). The parameters applicable
to FXS Ground Start are shown in the figure below and described in the table
that follows.
FXS Ground Start Interface: Parameter Definitions
Field Name
Values Description
FXS Ground
Start
Y/N Enables FXS Loop Start interface
type.
Inter Digit
Timer
integer values
in seconds
This is the length of time that the
MultiVOIP will wait between
digits. When the time expires, the
MultiVOIP will look in the
phonebook for the number entered.
Default = 2.