User guide

86
Chapter 7 - RouteFinder Monitor
Multi-Tech Systems, Inc. RouteFinder RF802EW User Guide
Test Connection
This option tests your connection settings and assist you in determining if problems are due
to the modem, the RouteFinder, or an incorrect setting. Test Connection uses the attached
modems to dial-up the remote server (ISP) and establish a connection.
1. From the main RouteMonitor dialog box, click Test Connection to begin testing.
2. The Test Connection dialog box displays.
3. Select Connect Port 1 to test the WAN connection, or Connect Port 2 to test the
Async connection.
4. The monitor display window displays the actions of the test.
5. To terminate the connection, refer to the Terminate Connection instructions which
follow.
6. Click Exit to close the Test Connection dialog box.
Terminate Connection
The Terminate Connection option is designed to allow the Network Administrator to
terminate an RF802EW connection instantly.
1. From the main RouteFinder Monitor dialog box, select Terminate Connection.
2. The Terminate Connection dialog box displays.
3. Select Disconnect Port 1 or Disconnect Port 2.
4. Click Terminate Connection.
5. Click Exit to return to the RouteFinder Monitor dialog box.