User guide

Software
12 Click Yes to download the default setup. Clicking on the
No button prevents the defaults from being downloaded to
the RouteFinder.
13 The Novell IPX Protocol Default Setup dialog box
appears.
Note: To configure your RouteFinder, you now will use a
series of dialog boxes -- Novell IPX Protocol Default
Setup, IP Protocol Default Setup, and WAN Ports
Default Setup.
14 If your network protocol is IPX, continue with the following
steps. However, if your network protocol is IP, click the IPX
Routing Enable check box to disable IPX, then click OK
and proceed to step 18.
15 Router Name: If this is the only RouteFinder on your
network, you can use the default Router Name
(MTROUTER); otherwise, you must assign a new Router
Name in this field. The Router Name can be any printable
15