User guide

Software
17
The WAN network numbers have to be assigned by the
network administrator and must be unique throughout the
entire internetwork.
Note: Unlike the Ethernet port, the WAN ports do not
have the capability of learning the network number (i.e.,
the WAN ports do not have a file server).
18 Click OK when you are satisfied with your selections.
19 If you clicked OK from the Novell IPX Protocol Default
Setup dialog box (step 13), the IP Protocol Default Setup
dialog box is now displayed.
20 To change the IP parameters, proceed to the next step.
Otherwise, click OK to open the WAN Ports Default
Setup dialog box, then advance to step 23.
21 The default Ethernet IP Address has to be changed to your
unique LAN address. In the Ethernet group, change the
default IP Address, Subnet Mask, and Frame Type to the
values assigned to your LAN port.
22 For any WAN ports that are enabled, enter the Address,
Subnet, and Remote Address numbers.
23 Click OK when you are satisfied with your selections.
24 The WAN Ports Default Setup dialog box appears with all
three WAN Ports enabled, the speed set at 115200, and
the Modem Type defaulted to Multi-Tech 56K Socket
Modem.