User guide

RouteFinder MTASR3 Quick Start Guide
User Password.
The User Password can have as many as 7 characters. In
places where the password is used as a character string, it
is treated as a case insensitive string. Elsewhere (PPP’s
CHAP), it is treated as a case sensitive pattern.
Call Back
You have to click this check box in order to access the
following three Call Back functions.
Call Back Security Enabled
This parameter is of use in dial-in applications where the
user is required to be called back at a specific location.
Enabling this parameter results in having the administrator
assigning the call back parameters. Leave this function
disabled if the user is to be allowed to choose the call back
number and the call back delay.
Call Back Number
The callback number is editable only if callback security is
enabled (checked). This is the number where the user will
be called back. The user cannot choose the location
where he wants to be called back.
Call Back Delay
Call back delay is editable only if callback security is
enabled. This specifies the duration after which the user
will be called back at the administrator-assigned number.
Protocols
This lets you select the protocol(s) in which the user is
allowed to dial into the RouteFinder.
Dial In Ports
This enables you to select the port over which the user is
permitted to dial into the RouteFinder.
22