User's Guide

EkoTek Pager
indicates that the Call Fob must be returned to an upright position in
order to terminate the alarm sequence. If the Call Fob cannot be
returned to the upright position an alarm will be initiated. To cancel
the alarm after it has been initiated press the BLACK button.
Changing the Battery
When the battery is near the end of its operating life, the Call Fob is
programmed to provide a visual and audio warning – A single long
beep with an accompanying flash of the alert/status lamp.
The Call Fob will continue to operate normally for several days. To
ensure that calls are not missed, the old battery should be replaced
with a new AAA sized battery as soon as possible.
To remove the battery door, slide the battery door in the direction of
the arrow until the two ‘pips’ on the back of the Battery Door are
aligned. Rotate the battery door in an anti-clockwise direction to
expose the battery compartment.
Align ‘pips’ to remove
the battery door
Insert the new battery in the direction as shown at the back of the
battery compartment. Return the battery door back into position so
that it locks automatically with a click.
Dispose of the old battery carefully with consideration for the
environment and do not recharge or incinerate alkaline batteries.
Part No. 9261-8277 Issue 2.0 10