User's Guide

EkoTek Pager
When the battery requires changing the Call Fob will emit a single
long beep with an accompanying flash of the alert/status lamp.
Please refer to: Changing the Call Fob Battery.
Out-of-Range Notification
If the Call Fob is out-of-range of the EkoTek wireless network, the
Call Fob will emit 2-beeps accompanied by 2-flashes of the
alert/status lamp.
Switching the Call Fob Off
To switch the Call Fob off. Press and hold the BLACK button for 5-
seconds this is confirmed by a single flash of alert/status lamp
accompanied by a single beep.
To confirm that the Call Fob has been de-activated, press and
release the BLACK button. If the unit has been de-activated neither
the beep nor the alert/status lamp will activate.
Requesting Assistance or Raising an Alarm
In the event of an Emergency or where immediate assistance is
required press the RED button. Depending on how the EkoTek
system has been configured this may require a SINGLE or
DOUBLE press of the RED button. Please confirm this action with
your EkoTek system supervisor.
On pressing the RED button the Call Fob will acknowledge the alert
with a flash of alert/status lamp accompanied by vibrate and/or a
beep depending on configuration.
Cancelling an Alarm
At any stage during the initiation of an alarm or request for
assistance it can be cancelled. To cancel the alarm press and hold
Part No. 9261-8277 Issue 2.0 8