User's Manual

EkoTek Hub
Using the Emergency / Assist Button
Note: This feature has to be enabled by the System Supervisor
Raising an Alarm
In the event of an Emergency or where immediate Assistance is
required press the Red Star button. Depending on how the EkoTek
system is configured this may require a single or a double press.
Please confirm this with your EkoTek system supervisor.
On pressing the Red Star button the EkoTek Hub will either beep
and/or vibrate in sequence with a flashing alert lamp. Please note
that the precise nature of this acknowledgement is subject to
configuration. The screen will display the following information
indicating that the alarm has been raised and delivered:
11:34 AM 12.03.07 Day
No Unread Message
Raising Alarm
11:34 AM 12.03.07 Day
No Unread Message
Alarm Delivered
Cancelling an Alarm
At any stage during the initiation of an emergency / assist alarm it
can be cancelled. To cancel the alarm press and hold the X button,
the display will confirm this action with the following message:
11:34 AM 12.03.07 Day
No Unread Message
Clearing Alarm
Part No. 9261-8276 Issue 1.0 11