User's Manual

EkoTek Hub
Dead Man Alert
The EkoTek Hub is equipped with a Dead Man Alert this feature has
to be enabled by the System Supervisor.
The Dead Man Alert operates by initiating an alert to the EkoTek
Hub at pre-set time intervals, this alert must be acknowledged by
single press on ANY of the pager buttons within a pre-set time
period:
11:34 AM 12.03.07 Day
No Unread Message
Press any key to cancel
Please note that the System Supervisor configures both the
frequency of the Dead Man Alert and the required response time.
If the alert is not acknowledged within the pre-set time period the
EkoTek Hub will automatically initiate the following alarm escalation
sequence:
11:34 AM 12.03.07 Day
No Unread Message
Raising Alarm
11:34 AM 12.03.07 Day
No Unread Message
Alarm Delivered
Please note that at any stage during the Dead Man Alert process it
is possible to cancel the alarm by pressing the X button.
Part No. 9261-8276 Issue 1.0 12