User's Manual

EkoTek Hub
Archiving a Message
Note: The archive feature is available to all 1-way messages.
However, for 2-way messages the archive feature can only be
accessed once the message has been viewed and appropriate
action taken.
Messages may be stored for reference, by using the archive facility.
The EkoTek Hub cannot automatically delete archived messages
when the message memory is full, only the user can delete
messages. At the end of the message you wish to archive, press
the X button to see the message option screen. Move the pointers
to the Archive item with the S or T button:
View again
Delete
Delete All
**> Archive <**
Select Archive with the X button and the pointers will change to
question marks.
Confirm your selection by pressing the X button again. The screen
will briefly display Archiving. When the current message has been
archived, the screen will show the previously received message. If
you wish to archive this message, repeat the procedure. If there are
no other messages, you may return to the Standby Screen by
pressing and holding the X button for one second. The following
screen will be displayed:
No Messages
Part No. 9261-8276 Issue 1.0 21