User's Manual

EkoTek Hub
Set Time and Date
To set the time and date, press the X button when the Standby
Screen is displayed. The Options Screen will be displayed. Move
the pointers to Time and Date by pressing the T button:
Options
**> Time and Date <**
Select this item by pressing the X button:
Set 12/24 Hour Mode
**>Set Time and Date <**
Set Night Mode
Move the pointers to Time and Date by pressing the T button, then
select by pressing the X button:
Time and Date
12:21 PM 12.09.06
This screen allows you to set the time and date and also the 12 or
24-hour format. The currently selected item will flash. To select
another item for change, press the X button. Each press of the X
button will advance the selection to the next item. When the item
you wish to change is flashing, press the S or T buttons to
increase or decrease its value.
Once you have set the time and date, to return to the Standby
Screen press and hold the X button for one second.
Part No. 9261-8276 Issue 1.0 25