User's Manual

EkoTek Hub
Setting the Message Display Options
The EkoTek Hub is equipped with display options these can be
customised according to your personal requirements. To change
the message display options, press the X button from the Standby
Screen. The Options Screen will now be displayed and select
Options by pressing the X button:
**> Options <**
Time and Date
Move the pointers to Display by pressing the T button and select
this item by pressing the X button:
**> Display <**
Auto-delete
Alert
IP Address
The following screen will be displayed:
Font 2
Backlight On
Display Timeout 16s
Contrast 16
The selected item will flash. To select the next item, press the X
button. Each press of the X button will advance the selection to the
next menu item. When the item you wish to change is flashing,
press the S or T buttons to change its value.
Part No. 9261-8276 Issue 1.0 29