User's Manual

EkoTek Hub
Setting Auto Delete
The Auto Delete function allows you to set the maximum number of
stored messages, excluding those in the Archive memory. If the
number of messages in the memory exceeds the selected number,
then the oldest Read message is deleted. Should there be no Read
Messages, then the oldest Un-read Message is deleted instead.
If the Auto Delete value is changed and the number of messages in
the memory exceeds the new setting, then one message will be
deleted per minute, until the memory equals the new setting. The
available options are 1 through to 6 messages. To access the Auto
Delete function, press X the button to display the Options Screen.
**> Options <**
Time and Date
Press the X button to select Options. Move the pointers to Auto-
delete by pressing the T button and select using the X button:
Alert
Display
**> Auto-delete <**
IP Address
The following screen will then be displayed:
Auto-delete 5
To set up Auto-delete, press the S or T button to change the
setting and then return to the Standby Screen by pressing and
holding the X button for one second.
Part No. 9261-8276 Issue 1.0 31