User's Manual

EkoTek Hub
Powering Up the EkoTek Hub
The EkoTek Hub is powered via a 110, 220 or 240 Volt switch mode
power supply unit. On switching on the EkoTek Hub a message will
then be displayed for three seconds, whilst self-checks are being
performed. Finally, the Standby Screen will be displayed:
12!00 AM 01.01.06 Day
No Unread Messages
An exclamation mark (!) will flash between the Hours and the
Minutes (11!34 AM). This indicates that the EkoTek Hub is in the
process of starting up. Once the EkoTek Hub has started up this
will change to a ‘period’ symbol and the EkoTek Hub will
automatically synchronise with the EkoTek network.
The 4
th
line of the screen will display ‘EkoTek’ once the EkoTek Hub
has initialised:
11:34 AM 12.03.07 Day
No Unread Messages
EkoTek
Part No. 9261-8276 Issue 1.0 9