User's Guide

Page 15
Equipment Installation
Choosing a location for a repeater.
It is important that a repeater is located within the good coverage area of
the base unit. Failure to do so will result in apparent poor reception for any
handset connecting to the repeater.
The Unit should be Located at Least 10cm away from any metal and the
same distance from the ceiling or corners of the room. The more free space
around the unit the better. Choose a location that is free of any obstructions
(such as racking or filing cabinets). Although a high location is good it may
be necessary in the future to connect a PC to the CS100 for administration
or maintenance.
Avoid locating Repeater in the void area of suspended ceilings.
If an External location is chosen for siting the unit please call your supplier
for further advice before proceeding with the installation.
Unpacking your CS100 System
 Check all equipment for damage, and correct delivery
 Assemble all handsets and chargers ready for battery charging
Installation and Configuration
 Charge all handset batteries
 Determine the location for the CS100 Base Station
 Register the Master handset and all other user handsets
 Test CS100 Base Station coverage
 Assuming coverage is OK install the CS100 Base Station
 Determine the location for any Repeaters
 Register and configure Repeaters
 Test coverage handled by Repeaters
 Assuming coverage is OK install any Repeaters
 Verify system operation and installation successful