User's Guide

Page 30
PC Configuration
4.2 Configuring CCFP for the first time
When you first load the CCFP Administration software on your computer, it
will automatically attempt to configure the connection settings to the CS100
Base station. The following screen will appear as this happens:
By default the program looks for a connection on COM1 via a Direct
Connection. If these are not the correct settings, you can click on the
‘Change Communications Configuration’ button.
Using this settings window, you can select between the available COM ports
on your computer, and also between Direct Connection or Modem
Connection.
Direct Connection: Connection directly from the CS100 System to the PC
Direct connection is limited to 3 metres between the CCFP or 5 metres
using a modem driver.
Modem Connection: PC remotely accesses the CS100 System via the
telephone system.