User's Guide

Page 36
PC Administration
Handset Registration
To register the handsets on to the CS100 , registration must be ‘allowed’.
1. Select options-preferences
2. Select ‘allow subscription’ and ‘ok’ then ‘close’
Handsets may now be registered.
1. Menu.
2. Left arrow twice
3. Menu Login - OK
4. Menu Select Login - OK
5. Select Login System 1 - 4 on handset PIE up to 4I
If the ‘Login’ slot has been used the ARI number of the system will be
displayed, you can check the s/w version by *99982* OK.
CH70 PIE 4K or Later. Go to step 7 if this is the first time the handset
has been registered.
6. Select - OK. The Handset will beep.
7. Left arrow twice to ‘subscription create’ - OK
8. Select - OK. and ‘Create system 1 - 4’. AC____ will be displayed, use
arrow keys to select the same registration slot as the login.
(Login 1 = System AC1).
9. Press - OK to register the handset after a short period of time the
handset should beep once. If the handset beeps several times and the
message “subscription failed” is displayed go back to the start of the
handset registration and begin again.
Registration failure checks:
$ Registration Not enabled
$ Wrong slot selected (AC1 = Login1)
$ Handset ID incorrect or not entered into system.
$ AC Number required.