User's Guide

Page 42
5. Repeater and Handset Programming
Software for programming repeaters and handsets can be downloaded from
www.multitone.com . The following features can be programmed.
5.1 Startup text
5.2 Instructions for Installation and Configuration of a Repeater
5.3 Setting up Repeaters
5.4 Determining Where to Locate a Repeater
5.5 Registering a Repeater
5.6 Establishing Repeater Jumps
5.1
Start-up text
Programming the handset start up text requires the Kirktool software and a
CH70-DS Docking station.
The Start-up text can be written in 3 lines of the display. As soon as the box
3040 PP is marked, the option of writing the text in 3 lines will appear.
The current version of software revision 4.6 has a number of features.
$ Volume adjustment for PPI Handset - DO NOT
USE.
$ Start up text - used to enter start up text on CH70 Handsets.
$ Repeater - used to program repeaters on CS600 and CS100.
$ Communications - used to set the com port for programming.
$ Download - used for loading alternative languages.
$ Gain Control - used for setting handset volume.
Repeaters