User's Guide

Page 55
CS100 Messaging
7.0 CS100 Messaging - P318 & Access Integrator-K
It is possible to increase even further the usefulness of a cordless
environment by integrating fire alarms, burglar alarms, nurse call systems,
messaging software, paging systems and simple switches (such as pressure
pads, door bells etc.) with the CS100.
This can be achieved with the addition of Multitone Electronics' P318 or
Access Integrator-K messaging interface.
The P318 has serial ports that can be configured to take direct data from
TAP, ESPA and a range of other protocols. It also has 32 Voltage free
contacts which can be configured as normally open or closed. The P318 will
also allow the CH70 handset to activate these switches remotely by entering
a code.
Activation of contacts can be programmed to send a message to a handset
or team of handsets.
Examples of uses for Voltage free contacts:
 Notify users of door bell push
 Alert users to the customer presence via a pressure pad.
 Pump or refrigeration alarms
 Switch lights on or off via the handset
 Panic buttons.
Access Integrator provides 16 Voltage free contacts connected to a LAN and
has an Internet browser interface for easy to use system administration.
Any PC with user rights can send messages to a single handset or team of
users, Access Integrator-K has two serial ports, one for connection to a
Multitone CS100 or CS600 (Kirk system 1500 or 500) and a second serial
port for TAP, MEP or ESPA input.
For further information visit the multitone web site www.multitone.com
or contact your account manager.