User's Guide

Page 5
System Overview
Technical Approvals:-
This equipment is compliant with the following regulations, according to country of commission:-
Europe - Radio & Telecommunications Terminal Directive 1999/5/EC
(see accompanying leaflet);
United States - FCC Part 15; UL1950
Canada - RSS 210; CAN 22-950
US/Canada - This device complies with Part 15.247 of the FCC Rules & Regulations and
Industry Canada Standard RSS210. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any modifications to this equipment not expressly authorised by Multitone, could void the user’s
authority to operate the equipment.
Safety & Product Information
Before using your equipment, read this User Guide and follow any warnings and instructions.
Do not install the equipment near any sources of water, or in damp conditions. Use only the
power adapter provided, or a recommended equivalent and do not overload wall outlets and
extension cords, as this can result in fire, or electrical shock. If in doubt, consult your dealer or
local power company.
Do not use the equipment where there is a danger of electrically ignited explosions eg. gas leaks,
or petroleum vapour. Do not expose the equipment to direct sunlight for long periods, or exces-
sive heat and moisture. Do not attempt to disassemble the equipment. If it has been adversely
exposed to liquid, dropped or damaged, or does not operate as intended, please refer to qualified
service personnel. Use only a damp cloth for cleaning. Avoid liquid, or aerosol cleaning agents.
US/Canada :- Operation of the equipment in the proximity of microwave appliances or radio/TV
equipment, may be subject to interference.
NB Unless special provision has been made, this equipment will not operate in the event of a
power blackout. Keep a back-up phone for emergencies.
Specific Absorption Rate (SAR) Information
This cordless telephone equipment consists of radio transmitters and receivers. It has been
designed not to exceed the recommended limits for exposure to radio-frequency (RF) energy, as
set by the U.S. Federal Communications Commission and Industry Canada/Health Canada. The
measured SAR levels from this equipment, is below the recommended safety limit of
1mW/sq.cm., for uncontrolled exposure to equipment operating @ 2.4GHz. However, it is
recommended that an operational distance of >20cm is maintained between personnel and the
equipment, other than for servicing purposes.