Quick Guide
9261-9210 EkoTek-Pager/QUG/Iss. 7 5 of 13
Raising and clearing alarms
• When an alarm is raised a text message is sent to configured group of pagers.
• The text includes the raising device’s identity, the alarm type that has been activated
and the current location of the device.
• On clearance of an alarm, a text message is sent with the device’s identity stating the
alarm has been cleared.
• Upon receiving a message, the pager will sound an alert, vibrate and activate the
backlight (depending on profile settings) and the message will be displayed.
Emergency Alarm (red button): (if enabled)
• Single click or double click, (depending on configuration) raises an emergency alarm.
• The alarm is sent out to the pagers/users configured by the administrator.
• Use the ◄ button to clear the alarm.
• The alarm will be re-sent at an interval configured by administrator, until the alarm is
cleared.
Assist Alarm (blue button): (if enabled)
• Single click raises assist alarm and automatically returns to normal state (no alarm
clear necessary).
• The alarm is sent out to the pagers/users configured by the administrator.
Wander alarm (if enabled)
• Zones which are restricted, are set and configured by the administrator.
• Upon entering one of these restricted zones, the pager will activate a response (as
configured by the administrator):
o Audible and vibrate alert
o Audible alert
o Vibrate alert.
• The message ‘unauthorised zone’ will also appear on the pager screen.
• The alarm is sent out to the pagers/users configured by the administrator.