System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 19

Note: The survey pager is continuously transmitting a signal and its battery life is

therefore short. To avoid unnecessarily draining the battery, switch off and/or remove

the battery when not in use.

Survey pager modes

RSSI

This screen indicates the signal strength for each channel in both the Rx and

Tx paths. The measurement for each channel is displayed as a vertically

stacked number. Ideally the RSSI should be 30 or above

Quality

This screen indicates the quality for each channel in both the Rx and Tx paths.

The measurement for each channel is displayed as a vertically stacked

number. The range of reported values is 0 to 99 with 99 being the best quality.

Ideally the quality should be 90 or above