System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 39

4. Open the hub. To open the hub, push the two locking tabs in and then

separate the cover from the back plate.

5. Connect an Ethernet (RJ45) patch cable to the RJ45 connector - see the

hub interfaces diagram.

6. Connect the other end of the patch cable to the Ethernet (RJ45) connector

on the PC. Note: Some network cards require a crossover cable for direct

connection.

7. If connected correctly the screen will change to show the cable connected.

8. Double click the ‘Local Area Connection’ icon to open the properties

window.