System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 53

Any devices with a display will be added to the first pager group if capacity

exists.

Mobile device monitor

All fixed devices are automatically monitored for battery condition and presence

on the network, with maintenance messages generated on low battery or

absence of the device from the network; these messages are sent to all users

in pager group 1. Mobile devices (pagers and call fobs) can also be monitored

for battery condition and presence on the network. Set to ‘Off’, ‘Battery’ or

‘Network+Battery’ as required.

Note: The battery condition will be displayed on the ‘Device status’ page,

regardless of this setting.

Radio language

The pager display language is available in English, Francais, Espanol,

Deutsch, Svenska or Norsk. Select required language from the drop list and

click ‘Submit’.

Auto-register names

With the device auto-register set to ‘On’, when the network detects a device it

gives a default name appropriate to the device type: HUB, IP SLAVE,

REPEATER, SOLAR REPEATER, CALL POINT, PAGER or FOB. This default

name can be redefined if required.

Select device from the drop list and click ‘Details’. Enter a new name for the

default and click ‘Submit’ to set. For example, this sequence could be used to

set all pagers to register by default as ‘Staff’ and all call fobs as ‘Visitor’.

Devices

The devices page lists ALL the devices connected in the EkoTek network when

ALL is selected.

Refresh

To get the current list of devices, select the hardware type to be listed from the

drop list and click the ‘Refresh’ button.

The devices will then be listed;