System Manual

EkoTek System Installation and Configuration Manual

9261-8173 issue: 8 Page 72

SER web pages

To configure the SER need access to the SER web pages. This is done using

any standard web browser such as Internet Explorer or Firefox. Open up the

browser and type in the default IP address (192.168.1.3). This will need to be

changed as all SERs must have a unique IP address within the customer range

of IP addresses.

SER home page

When the IP address is typed into browser the SER opens at home page and

immediately you’re prompted for password. (Default – blank).

Select ‘Submit’ and the following menu will be presented:

Configure SER IP address

Select the IP settings option and enter an address provided by the customer to

match their LAN Network, including mask and gateway settings.

IP settings must be consistent with HUB IP settings. Once details entered press

the ‘Submit’ button