Technical Manual

TLA 852/FLA 872
TM1205 Issue 2Page 2 - 14
The unit memory can hold a maximum of 20 messages. When this number is
reached the standby screen shows the memory full symbol.
If a new message is received when the memory is full, the oldest message is
deleted.
2.3.3 Archiving Messages
Messages can be protected by transferring them to the Archive Store. Refer to
paragraph 2.3.4 or paragraph 2.4.2. for the procedure.
2.3.4 Reviewing Information Service Messages (Optional Feature)
When this feature is available, the standby screen shows the symbol when the
pager receives an Information Service message.
To select the Information Service menu, push the ¬ button when the screen shows
the standby display.
The information menu screen shows a maximum of eight number symbols, each
enclosed within a circle. Numbers which have unread Information Service messages
have a thicker circle.
Use the ¬ or - buttons to choose the required service number then push the
O> button to show the message.
To review other messages on the same service, push the
¬ or - buttons until the
required message shows.
To return to the Information Services menu push the O> button repeatedly until the
menu shows.
To put an information service message into the Archive Store, use the procedure
given in paragraph 2.3.4.
2.3.5 No Service (Optional Feature)
When this feature is available, the standby screen shows the No Service symbol if
the pager cannot receive signals from the paging network.