Technical Manual

TM1205 Issue 1 Page (v)
THE RECEIVER SHOULD NOT BE CARRIED INTO AREAS WHERE EXPLOSIVE
GASES, OR DUST MAY BE PRESENT.
FCC & IC Statement Of Compliance
This device complies with FCC Part 15 & Industry Canada RSS210 regulations. Operation is
subject to the following two conditions:- (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Unauthorised modification to this equipment, will void the user’s authority to operate the device
under the terms of the above regulations.
SAFETY SUMMARY
The following information applies to both operating and servicing personnel. General Warnings
and Cautions will be found throughout the manual, where they apply, which refer to the applicable
part of this summary.
WARNING statements identify conditions or practices that could result in personal injury or loss
of life.
CAUTION statements identify conditions or practices that could result in equipment damage.
WARNING
CAUTION
STATIC SENSITIVE DEVICES ARE USED WITHIN THIS EQUIPMENT. CARE MUST BE
USED TO ENSURE DAMAGE TO THESE DEVICES IS NOT CAUSED BY HIGH LEVELS OF
STATIC ELECTRICITY. SPARE BOARDS OR COMPONENTS SHOULD BE STORED IN
ANTI-STATIC PACKAGING WHEN NOT INSTALLED IN THE EQUIPMENT.
PROTECT THE RECEIVER FROM LIQUIDS, STRONG MAGNETIC FIELDS AND EXTREME
TEMPERATURES. DO NOT LEAVE THE RECEIVER EXPOSED TO STRONG SUNLIGHT.
AREAS SUCH AS WINDOW LEDGES ARE TO BE AVOIDED.