User's Guide

KeyPage PIN Reset
If the KeyPager PIN has been forgotten it is
possible for the system to remotely reset the
PIN to that which was first programmed in the
factory. This requires that a special control
code be transmitted to the KeyPager to reset
the PIN. A method of verifying the user identity
must be agreed with the system administrator
who will supply an additional authorisation
code which must be entered to restore the
PIN.
KeyPage Barred Access
When the symbol is displayed it is not
possible to change the PIN. If this is
attempted the pager will display and the
symbol.
If the PIN has been incorrectly entered four
times it will not be possible to change the PIN
until the four hour lockout period has elapsed.
If this is attempted the pager will display the
and symbols
24
9261-6366 iss 2 21/11/02 9:04 am Page 28