User Manual

ManualsBrandsMUNBYN ManualsEnvelopesDigital Shipping Scale, 66lb Postal Scale with Hold and Tear Function Gram/Ounce/Pound Mail Postage Scale for Shipping Packages Mailing Small Business

Summary of content (6 pages)

PAGE 1
PAGE 2
CONTENTS 1.Product Introduction oe. Q technicality oo OD 3. Device Usage 31 Weighing 32 Hold Function 34 Tare 35 PCS .. 36 Conditional sss mss sass sass 3.7 Custom shutdown time 38 Error messages Be FAQ tree nee ee ee 88 REFERRALS PREFACE This user manual is designed to assist in the safe and trouble-free use of the device. The product is designed and manufactured in accordance with strict technical guidelines, using state-of-the-art. technologies and components. User manual download link: 1.
PAGE 3
Scale Platform LCD Display OnfOfi/Tare Button MODE Button 2. TECHNICAL DATA Parameter description Parameter values Product name Postal/Letter Scale Model DIPSO Load capacity [kg] 3okgy/6lb unit 9b; oz kg; lb'oz; Button Software Button; MODE Button; PCS Button; Minimum weighing weight 541g Standstill 180s (default) (When the scale is powered on, the scale will not automatically shut down} Power supply 15VX3AAA of AC adapter (110~240V DEVICE USAGE 3.
PAGE 4
34 Tare When using a container to weigh something, use this function to subtract the weight of the container as follows. 1. Place an empty container on the scale. nnn LLL 2. Short press the “Offend Tare” button to subtract the tare, and the viable will be cleared to 0.000kg. Luau 3. Put the items to be weighed in the container. PCS When you need to determine the number of multiple identical parts, you can use the “PCS” function. 1.
PAGE 5
ka 2. Short press the “On/Off/Tare” button to switch calibration units, then short press the “MODE” button to confirm. 3. Short press the “On/Off/Tare” button to set the tens place, such as 12kg, 22kg, etc. 4, Short press the “PCS” button to set the ones place, such as 3kg, 4kg, Skg, etc. The setting method for English unit sis similar. 5. After setting the calibration weight, press the “MODE” button to confirm the display of “CAL” and then the flashing calibration weight will be displayed. LAL 6.
PAGE 6
& FAQ Ql: What is the calibration interval? Al: Q2: How to exit function mode? A2: To exit the function mode, press Tare” button until the screen turns off. Q3: How long will the unit run on battery power? AZ: It is related to specific battery capacity. Theoretically, a 175mAh AAA alkaline battery can be used continuously for 6 hours. Q4: If the AC adapter and batteries are installed at the same time, which one will be used? A4: When the adapter is connected, it will automatically disconnect the battery.