Frequently Asked Questions
Table Of Contents
- Version History
- 1.0. Prepare
- 2.0. Connection Problems
- 3.0. General Setting
- 3.1 Q:Printer can not cut paper after printing the
- 3.2 Q:How to print Chinese characters?
- 3.3 Q:How to print Euro character €
- 3.4 Q:Cash drawer setting
- 3.5 Q:Alarm setting
- 3.6 Q:How to add my “LOGO” in the printed receipt?
- 3.7 Q:How to set up code page according to my lang
- 3.8 Q:How to reset the printer when the setting ge
- 3.9 Q:How to print hexadecimal characters?
- 3.10 Q:How to turn on/off the DHCP
- 3.11 Q:How to install the driver in Linux OS?
- 3.12 Q:How to customize the paper's specifications
- 3.13 Queuing function setting
Page19of30
ITPP047 Thermal Printer Hardware Manual
Version 1.00
A:Make sure the printer is connected with the power and turn it off.
①
Press the “FEED” button and simultaneously turn on the power.
②
Hold on pressing the “FEED” button for about 20 seconds, then “ERROR LED” on until “ERROR”
and “PAPER LED” double- flash again, release the “FEED” button when buzzer alarming.
At this time the printer has been initialized, restoring factory settings.
3.9 Q:How to print hexadecimal characters?
A:Make sure the printer is connected with the power and turn it off.
①Press the “FEED” button and simultaneously turn on the power.
②
Hold on pressing the “FEED” button for about 10 seconds, then the “ERROR: and “PAPER LED”
double- flashing at the same time.
③Wait for the “ERROR LED” on then release the “FEED” button.
Now the printer enters the hexadecimal mode. Press FEED button twice, and it will print automatically
with “Hexadecimal Dump” on the first line of the paper showing its hexadecimal mode.
3.10 Q:How to turn on/off the DHCP
A:
①：Ensure your printer is connected with computer by network cable.
②：Find the Net tool in the driver file as below.
--> -->
③:Find the DHCP option and click setting to turn on/off.
Figure 3- 14 DHCP Setting
3.11 Q:How to install the driver in Linux OS?
A:Guideline file:https://munbyn.biz/linux